Showing posts with label Patchwork. Show all posts
Showing posts with label Patchwork. Show all posts

Patchwork Clutch


Patchwork Clutch
With summer set for a seventies’ fashion revival this fab bag uses up the best of your fabric stash and accessorises denim or suede perfectly!

Materials
* 25 x 35cm cotton fabric for lining
* Five pieces of coordinating cotton fabric each 15 x 40cm
* 50 x 40cm heavyweight woven iron-on interfacing
* Rotary cutter, quilter’s ruler and cutting mat
* Sewing thread and needle
* Dressmaker’s pins
* 7mm jump ring and flat-nose pliers
* 3cm swivel hook
Size: 22.5 x 12.5cm

Everyone who enjoys patchwork ends up with a whole stash of fabrics – not only because when you go shopping the fabulous colours and patterns are so irresistible but also because you rarely use upall the fabrics bought for a particular project.
This little clutch bag is the perfect way to make headway into that stash, especially the smaller pieces as you can join them up to make longer strips if necessary.
The pattern has been cleverly worked out so that the finished clutch bag is neatly lined with a contrast fabric and all raw edges hidden! Such professional finishing details and quick additions, like the carrying strap, mean you can sell at a higher price with more profit for you.

How to make the clutch bag

Patchwork Clutch
1. Cut five pieces of coordinating cotton fabric each measuring about 15 x 40cm. Layer the pieces together so that theedges are level on one long side.
Using a quilting ruler and rotary cutter cut strips of the fabric in different widths measuring around 2.5-4cm.

2. Arrange the strips on the work surface to create a balancedlook in width, pattern and depth of colour. Stitch the strips together in pairs and then stitch the pairs together using 0.5cm seam allowance. Press the seams in one direction (press dark-coloured seams onto the dark fabric).

3. Iron interfacing onto the reverse side of the patchwork, then iron a second piece on top if you require extra stiffening. Place the patchwork on the cutting mat, lined up with the grid lines. Trim the edges straight and square to create a rectangle measuring 25 x 35cm.

4. Use a 10cm diameter dish or container to mark and round the corners at one end of the patchwork panel to create the flap shaping. Cut the lining fabric crossways to make a 13 x 25cm and a 21 x 25cm piece. Round two corners at each end of the longer edge of the larger piece.
Patchwork Clutch

5. Insert pins 24cm up from the short straight edge of the shaped panel on both sides to mark the start of the flap. Pin the lining fabric onto the flap right-sides together. Machine stitch around the curve end between the pins, reverse stitching at each end for strength. Snip at the end of the stitching and notch the curves. Sew the rectangle of lining fabric to the other end of the patchwork panel.

6. Turn the flap through, and press with a steam iron. Fold the patchwork right-sides together matching the seams at the edge of the flap. Pin the lining side seams as well, trapping the flap inside. Machine stitch the side seams from the folded edge, reverse stitching as you cross the point where the flap starts. Keeping the flap out of the way, sew the lining side seams and 2-3cm across the bottom edge of the lining. Repeat with the other side seam.
Patchwork Clutch

7. Trim across the corners and turn the clutch bag through. Use a chopstick or similar tool to ease out the corners. Sew across the gap in the lining. Turn the bag through and press. Open the jump ring and feed it into the stitching on the side seam of the bag. Bring it out again several stitches down and then close the ring with pliers.

8. Cut a 4 x 60cm piece of fabric. Fold in half and stitch the side seams. Turn through and press. Tuck the neat end through the loop on the spring hook. Fold the strip in half to tuck the raw edge under the other end. Sew in a square to secure the bag strap and hide the raw edges. Attach to the jump ring on the bag, to finish.

Elephantastic! How to make the elephants


How to make the elephants
Once you get the hang of it, these elephants are super-easy to create and make the most amazing home decoration!

Materials
* Oriental Blue Birds and Flowers cotton fabric measuring 50 x 29cm
* Oriental Blue Blossoms cotton fabric measuring 48 x 22cm
* Oriental Packed Blossom White cotton fabric measuring 38 x 18cm
* Oriental Stripe Blue and White cotton fabric measuring 15 x 16cm
* Oriental Blue Leaf Motif cotton fabric measuring 19 x 21cm 
* Navy blue 2mm dot cotton fabric measuring 12 x 13cm
* 90cm length of 7mm navy blue satin ribbon
* 36cm length of 4mm white piping cord
* Two 9mm round black plastic toy safety eyes
* Black embroidery thread
* Sewing thread in white and navy blue
* Polyester toy filling
* Hand sewing needles
* Sewing machine Stockists
* Size (h x w x d): 36 x 6 x 19cm
* Unless stated otherwise, use a sewing machine for all the sewing.


We think customers will find it hard to resist these gorgeous stacking elephants. Made from stylish blue and white oriental fabrics, they’re bang on-trend for summer homewares, too. They’re really simple to make and can be whipped up in just four hours or so, so are ideal for making to order in fabrics and colours to suit buyers’ decor. Advertise the fact that elephants represent strength, protection and good luck to make these a sure sales winner.

How to make the elephants

1. Use the templates to cut out the following: In Blue Birds and Flowers fabric, cut two Large Elephant Bodies and two Large Legs. In Blue Blossoms fabric, cut two Medium Elephant Bodies and two Medium Legs. In Oriental Packed Blossoms White fabric, cut two Small Elephant Bodies and two Small Legs. In Oriental Blue Leaf Motif fabric, cut four Large Ears. In the Oriental Stripe Blue and White fabric, cut four Medium Ears In the Navy Blue Dot fabric, cut four Small Ears. The templates include a 0.5cm seam allowance so there’s no need to add any more.
How to make the elephants

2. Using a sewing machine, sew each pair of ear shapes together with right-sides together and leave the short straight end open. Trim the edges to prevent the fabric bunching up, then turn each ear so it is the right side out.
How to make the elephants

3. Press each ear flat with an iron, then turn the straight edges in by 0.5cm and press down. Pin each ear onto the correct body shape so it is in the middle and that the ears are level. On the small body, position the ear 3cm from the top. On the medium body, position the ear 3.5cm from the top. On the large body, position the ear 5cm from the top. Secure each ear in place with a single line of stitching down the straight front edge of the ear.

4. Draw a dot on each of the medium elephant body shapes, positioned just in front of the ear and where the trunk meets the head. Make sure the dots are in the same place on both body shapes. Cut a small hole on the dot and from the front, push the post of the eye through and secure the eye in place by pushing the washer onto the back.
How to make the elephants

5. On each of the small elephant body shapes, positioned just in front of the ear and where the trunk meets the head, sew a curved backstitch eye using all the strands of the black embroidery thread. Make sure the eyes are level on both body shapes and that the curves are the right way up (creating a stretched ‘n’ shape).

6. On each of the large elephant body shapes, just in front of the ear and where the trunk meets the head, sew a downward curved chain stitch eye, using all the strands of the black embroidery thread. Make sure the eyes are level on both body shapes and that the curve is the right way up (creating a stretched ‘u’ shape).
How to make the elephants

7. On each body shape, pin the correct leg shapes in place, so the edges meet and the right sides are facing each other. Sew all the sides of the legs except the top edge.

8. To make the tails, cut piping cord into three lengths: 14cm for the large elephant, 12cm for the medium elephant and 10cm  for the small elephant. Tie a knot in one end of each tail leaving 2cm of the cord on the end. Separate the strands of the cord on the short end to make it fluffy.
How to make the elephants

9. Pin the body shapes right-sides together. Above the back legs, place the knotted end of the tail inside the body and pin the other end between the edges of the body shapes. On the small elephant, put tail 7cm from the bottom; on the medium elephant, 9cm and on the large elephant, 12cm. Sew body shapes together from top of one leg to top of other leg. Cut notches in the tight curves of the seams to prevent bunching. Turn through.
How to make the elephants

10. Stuff each elephant with toy filling and sew up the gap between the legs using a blind stitch. Place the medium elephant on top of the large elephant so they are facing the same way and sew the medium elephant’s feet onto the large elephant’s back using a blind stitch. Place the small elephant on top of the medium elephant so all three elephants are facing the same way and sew the small elephant’s feet onto the medium elephant’s back using a blind stitch.
How to make the elephants

11. Cut three 30cm lengths of blue ribbon. Wrap a length of ribbon around each elephant’s tail and tie in a neat bow, to finish.

Zippered Bag Patchwork


Zippered Bag
Skinny insert strips

1. Begin sewing together your assorted strips using the freehand curved piecing technique. When you are ready to insert a skinny strip, place the strip to which you want to add an insert faceup on a cutting surface. Rotary-cut a gentle curve the length of the strip (Photo C). Discard the excess fabric on the right.


Zippered Bag

2. From a color that is brighter or darker than the just-trimmed strip, cut a 3/4"-wide strip for the insert. Even though this is a straight cut, the skinny insert will have enough flexibility to curve along the first strip because it’s only 3/4" wide (Photo D).

3. Place the second (insert) strip on top of the first strip with right sides together and the first inch or so of the cut edges aligned. Using a 1/4" seam, stitch the strips together, stopping as needed to reposition the second strip to line up with the first strip (Photo E). Press open, pressing seam toward the wider strip.

4. Place your strips wrong side up. With a chalk pencil or light lead pencil, sketch the next seam line on the insert strip, using the seam just sewn as a guide and making sure the space between that seam and chalk line is less than 1/4" (Photo F). If you want the insert color to disappear at one or more points, sketch right beside the sewn line. Trim excess fabric 1/4" from the chalk line (Photo G).

Zippered Bag

5. Place the pieced fabric and the next strip you’re going to add faceup on your cutting surface. Lap the cut edge of the insert strip over the next strip and use it as a guide for cutting a gentle curve the length of the strip (Photo H). Discard the excess bit of fabric under the insert strip.

6. Flip the next strip back onto the insert; stitch on the marked chalk line on the insert. Press seam toward the wider strip (Photo I).
Zippered Bag

7. Continue adding strips, varying the strip width, to piece a rectangle that is at least 6 1/2x9 1/2".

Walk in the park. Quilt patchwork


Walk in the park. Quilt patchwork
A simple yet graphic throw shows it’s possible to successfully combine wovens and prints.
A neutral solid marries the playful fabric mix.


Materials
30-6x21" pieces or 2 1/2 yards total assorted prints and  plaids (blocks)
2 7/8 yards gray chambray (setting squares, border, binding)
3 3/8 yards backing fabric
60x82" batting

Finished quilt: 52x74"
Finished block:  3 1/2" square

Yardages and cutting instructions are based on 42" of usable fabric width. Measurements include 1/4" seam allowances. Sew with  right sides together unless otherwise stated.

Cut fabrics
Cut pieces in the following order. Cut gray chambray border strips lengthwise (parallel to the selvages).

From assorted prints and plaids, cut:
118-4 3/4" squares
From gray chambray, cut:
7-2 1/2x42" binding strips
2-14x74" border strips
30-4" setting squares

About the quilt

Although the form of the block in Walk in the Park is the same as an hourglass block, the design and color placement are different. Designers intentionally avoided the placement of a traditional hourglass block, but rather randomly placed quarter-square triangles in a grid.
If you want to take this block more traditional and make it a classic hourglass, choose fabrics with clear contrast for the opposing triangles. But if you want the center panel to read as more modern by making it one unit instead of a series of blocks, opt not to differentiate the opposing triangles so you don’t see the hourglass pattern.


Walk in the park. Quilt patchwork

Make hourglass blocks

1. Use a pencil to mark a diagonal line on wrong side of 59 assorted
print or plaid  4 3/4" squares.

2. Layer a marked print or plaid square atop an unmarked print or plaid 4 3/4" square. Sew pair together with two seams, stitching 1/4" on each side of drawn line (Diagram 1). Cut  pair apart on drawn line and press open to make two triangle-squares. Each should be 4 3/8" square including seam allowances. Repeat to make 118 triangle-squares total.

3. Cut each triangle-square in half diagonally to make 236 triangle halves (Diagram 2).

4. Layer two nonmatching triangle halves, aligning and pinning through center seams. Sew together to make a block (Diagram 3). Press seam open. The block  should be 4" square including seam allowances. Repeat to make 118 blocks total.

Walk in the park. Quilt patchwork

Assemble quilt  top

1. Referring to Quilt Assembly Diagram, lay out  117 hourglass blocks and the gray chambray setting squares in 21 horizontal rows, distributing colors evenly.

2. Sew together pieces in each row. Press seams open. Join  rows to make quilt center; press seams open. The quilt center should be 25x74" including seam allowances.

3. Sew gray chambray 14x74" border strips to long edges of quilt center to complete quilt top. Press seams open.

Walk in the park. Quilt patchwork

Finish quilt

1. Layer quilt top, batting, and backing; baste.

2. Quilt as desired. Machine-quilted the blocks with stippling and stitched a swirl-and-pebble design in the setting squares and border (Quilting Diagram).

3. Bind with gray chambray binding strips.

Walk in the park. Quilt patchwork

Quilt. Every Little Bit


Quilt
Turn what may seem like trash into a quilt you truly will treasure. The design will have you saving the smallest of leftovers to create the scrappy Churn Dash blocks.

Quilt

Materials

 42-12x21" pieces or 4 5/8 yards total assorted dark prints in red, blue, green, plum, black, brown, and gold (blocks, sashing)
 3 1/3 yards tan print (blocks, sashing, inner border)
 1 1/4 yards blue tone-on-tone (middle border, binding)
 1 1/4 yards red print (outer border)
 4 1/4 yards backing fabric
 Tracing paper or other foundation material
 75x83" batting

Finished quilt: 66 1/2x74 1/2"
Finished blocks: 6" square


Yardages and cutting instructions are based on 42" of usable fabric width.
Measurements include 1/4" seam allowances. Sew with right sides together unless otherwise stated.
Press seams in directions indicated by arrows on diagrams. If no direction is specified, press toward darker fabric.

Cut fabrics

Cut pieces in the following order.
From assorted dark prints, cut:
138—3 1/4" squares
84—2 7/8" squares
1,344—1 1/4x2" rectangles

From tan print, cut:
6—2 1/2x42" strips for inner border
97—2 1/2x6 1/2" sashing strips
84—2 7/8" squares
168—1 1/2x21/2" rectangles
328—1 1/2" squares

From blue tone-on-tone, cut:
15—2 1/2x42" strips for middle border and binding
From red print, cut:
7—4 1/2x42" strips for outer border

Assemble hourglass units

1. Use a pencil to mark a diagonal line on wrong side of 69 assorted dark print 3 1/4" squares.
2. Layer a marked dark print 3 1/4" square atop an unmarked dark print 3 1/4" square. Sew together with two seams, stitching 1/4" on each side of drawn line (Diagram 1). Cut pair apart on drawn line and press open to make two large triangle-squares. Each should be 2 7/8" square including seam allowances. Repeat to make 138 large triangle-squares total.
3. Mark a diagonal line perpendicular to seam line on wrong side of 69 large triangle-squares.
4. Layer a marked large trianglesquare atop an unmarked large triangle-square (Diagram 2).
Sew 1/4" from each side of drawn line. Cut pair apart on drawn line and press open to make two hourglass units. Each unit should be 2 1/2" square including seam allowances. Repeat to make 138 hourglass units total.

Quilt

Assemble Square-in-a-Square units

1. Mark a diagonal line on wrong side of each tan print 1 1/2" square.
2. Align marked tan print 1 1/2" squares with opposite corners of an hourglass unit (Diagram 3; note direction of marked lines). Sew on marked lines. Trim excess fabric, leaving 1/4" seam allowances.
3. Align marked tan print 1 1/2" squares with remaining corners of hourglass unit (Diagram 4). Stitch and trim as before to make a Square-in-a-Square unit. The unit should be 2 1/2" square including seam allowances.
4. Repeat steps 2 and 3 to make 82 Square-in-a-Square units total.

Quilt

Make small triangle-squares

1. Mark a diagonal line on wrong side of each tan print 2 7/8" square.
2. Using marked tan print 2 7/8" squares and assorted dark print 2 7/8" squares, repeat Assemble Hourglass Units, Step 2, page 42, to make 168 small triangle-squares (Diagram 5). Each should be 2 1/2" square including seam allowances.

Quilt

Quilt

Make foundation papers

The Foundation Pattern is on Pattern Sheet 4. Make copies of the Foundation Pattern using one of the following methods, then cut out each pattern roughly 1/4" outside dashed lines to make 168 foundation papers:
Use a pencil to trace the Foundation Pattern 168 times onto lightweight tracing paper or other foundation material, tracing all lines and numerals.
Download a page of 12 Foundation Patterns from AllPeopleQuilt.com/097 and print it 14 times onto foundation material.

Assemble strip units

1. With right sides together, layer two assorted dark print 1 1/4x2" rectangles, aligning long edges. Referring to Diagram 6, place a foundation paper atop layered pieces, positioning it so aligned edges are 1/4" beyond stitching line between positions 1 and 2.

Quilt

2. Working with marked side of foundation paper up, sew on stitching line through all layers, extending seamseveral stitches past dashed lines on pattern (Diagram 6). Trim seam allowances to 1/8" (Diagram 7).

Quilt

3. Press position 2 rectangle open, and trim it to about 1/4" beyond stitching line between positions 2 and 3 (Diagram 8).
4. With right sides together, align a third dark print 1 1/4x2" rectangle withtrimmed edge of position 2 rectangle. Sew on stitching line between positions 2 and 3 (Diagram 9). Trim seam allowances to 1/8". Press position 3 rectangle open and trim it 1/4" beyond stitching lines between positions 3 and 4.

Quilt

5. Continue adding dark print rectangles, stitching and trimming in same manner, until you have pieced entire foundation paper. Trim pieced unit and foundation paper on dashed lines to make a strip unit (Diagram 10). The unit should be 2 1/2x1 1/2" including seam allowances Remove foundation paper with tweezers or the blunt edge of a seam ripper. If desired, stay-stitch 1/8" from outer edges of unit to prevent distortion.
6. Repeat steps 1–5 to make 168 strip units total.

Quilt

Assemble blocks

1. Sew together a strip unit and a tan print 1 1/2x2 1/2" rectangle to make a side unit (Diagram 11). The unit should be 2 1/2" square including seam allowances. Repeat to make 168 side units total.
2. Referring to Diagram 12, lay out one Square-in-a-Square unit, four small triangle-squares, and four side units in three rows. Sew together pieces in each row. Join rows to make a Churn Dash block. The block should be 6 1/2" square including seam allowances. Repeat to make 42 Churn Dash blocks total.

Quilt

Quilt

3. Referring to Diagram 13, lay out six hourglass units and three Square-in-a-Square units in three rows. Sew together pieces in each row. Join rows to make a border block. The block should be 6 1/2" square including seam allowances. Repeat to make four border blocks total.
 
Quilt
 Assemble quilt center

Referring to Quilt Assembly Diagram, lay out 28 hourglass units, 28 Square-in-a-Square units, tan print 2 1/2x6 1/2" sashing strips, and Churn Dash blocks in 15 horizontal rows. Sew together pieces in each row. Press seams toward sashing strips. Join rows to make quilt center. Press seams away from block rows. The quilt center should be 50 1/2x58 1/2" including seam allowances.

Assemble and  add inner border

1. Cut and piece tan print 2 1/2x42" strips to make:
2-2 1/2x58 1/2" inner border strips
2-2 1/2x50 1/2" inner border strips
2. Sew long inner border strips to long edges of quilt center. Press seams toward inner border.

3. Sew remaining hourglass units to ends of short inner border strips to make pieced strips. Sew pieced strips to remaining edges of quilt center. Press seams toward inner border. The quilt center now should be 54 1/2x62 1/2" including seam allowances.

Assemble and add middle and outer borders

1. Cut and piece blue tone-on-tone 2 1/2x42" strips to make:
2-2 1/2x62 1/2" middle border strips
2-2 1/2x54 1/2" middle border strips

2. Cut and piece red print 4 1/2x42" strips to make:
2-4 1/2x62 1/2" outer border strips
2-4 1/2x54 1/2" outer border strips

3. Sew together a long middle border strip and a long outer border strip to make a side border unit (Quilt Assembly Diagram). Press seam toward outer border strip. The unit should be 6 1/2x62 1/2" including seam allowances. Repeat to make a second side border unit.
4. Sew together a short middle border strip and a short outer border strip; press seam toward outer border strip. Join a border block to each end of joined strips to make a top border unit (Quilt Assembly Diagram; note orientation of blocks). Press seams away from blocks. The unit should be 6 1/2x66 1/2" including seam allowances. Repeat to make a bottom border unit. (Refer to photo, to see orientation of blocks on bottom border unit.)
5. Sew side border units to long edges of quilt center. Add top and bottom border units to remaining edges to complete quilt top. Press all seams toward border units.

Quilt

Finish quilt

1. Layer quilt top, batting, and backing; baste.
2. Quilt as desired. Machine-quilted arcs, parallel lines, and dense ribbon designs in the Churn Dash blocks (Quilting Diagram). She stitched arced pinwheel patterns in the sashing, continuous swirls in the inner border, and a feathered vine in the outer border.
3. Bind with remaining blue tone-ontone 2 1/2x42" strips.

Quilt. In The Loop


Quilt. In The Loop
Wondering what to do with all of those big prints you covet?
Fussy-cut them to create a kaleidoscope of color.



Quilt. In The Loop

Materials
If you are fussy-cutting, you may need more than the yardages specified depending on your fabrics’ repeats.
3 yards fuchsia print (blocks)
1 yard each of pink pony print and multicolor chevron (blocks)
2 yards multicolor floral (blocks)
2 3/4  yards ivory print (blocks)
1 3/4  yards pink-and-orange dot (sashing)
1/4 yard light turquoise print (sashing squares)
3/4 yard multicolor feather print (binding)
5 1/2 yards backing fabric
83x98 batting

Finished quilt: 74 3/4 x 89 1/2" (full-size with 10" drop)
Finished block: 9" square

Yardages and cutting instructions are based on 42" of usable fabric width.
Measurements include 1/4" seam allowances. Sew with right sides together unless otherwise stated.
Press seams in directions indicated by arrows on diagrams. If no direction is specified, press toward darker fabric.

Cut fabrics

Cut pieces in the following order. Patterns are on Pattern Sheets 1 and 2. To make templates of patterns, see Make and Use Templates. Be sure to transfer dots and center marks to templates, then to fabric pieces.
Designer fussy-cut most of the fabrics: He centered the pink-andorange dot in the sashing strips, centered a pink star in each light turquoise print sashing square, and cut each set of four matching.
A wedges from identical positions in the large prints.

Quilt. In The Loop

From fuchsia print, cut: 120 of Pattern B
From pink pony print, cut: 32 of Pattern A
From multicolor chevron, cut: 28 of Pattern A
From multicolor floral, cut: 60 of Pattern A
From ivory print, cut:
49 of Pattern C
22 of Pattern D
From pink-and-orange dot, cut:
30—2x20" sashing strips
60—2x9 1/2" sashing strips
From light turquoise print, cut:
 42—2" sashing squares
From multicolor feather print, cut:
9—2 1/2x42" binding strips

Tips for Fussy Cutting

To create the striking “circles” in his quilt, fussy-cut A wedges from three different types of prints. Start by tracing Pattern A onto template plastic; cut out. Then identify your print type.

Large-scale print with multiple motifs: Place template on right side of fabric. Move it until you’re happy with area isolated by template. Trace around template. Before moving template, use a pencil to trace some motifs onto the template (see photo, below). Reposition template in same place on another fabric section; trace. Repeat to create four matching wedges total. Erase pencil marks on template. Repeat to trace 15 sets of four matching wedges; cut out.
To ensure he had enough fabric, traced all wedges before cutting out any pieces.

Quilt. In The Loop

Large-scale print with more regularly spaced repeating motifs: used the same technique as above, centering the wedge on same portion of the pony print for each set of four wedges.
Print with a repeating design, such as a chevron or stripe: Trace multiple wedges in a line across fabric, aligning template with the same portion of the design each time.

Assemble blocks

1. With right sides together, match center notches of a fuchsia print B arc and a pink pony print, multicolor chevron, or multicolor floral A piece (Diagram 1). Pin together at center, at seam ends, and liberally in between, gently easing edges as needed to align (Diagram 2).

Quilt. In The Loop

2. Sew together curved edges to make a corner unit (Diagram 3). Clip into seam allowance of the edge that curves in (the concave edge) as needed to get it to lie flat, but do not cut into or beyond seam lines. Do not clip convex edge (the edge that curves out).

Quilt. In The Loop

3. Repeat steps 1 and 2 to make 120 corner units total (30 sets of four matching corner units).
4. Before assembling blocks, lay out all corner units in sets of four to create 30 circles (Quilt Assembly Diagram).

Quilt. In The Loop

5. Referring to your layout and the Quilt Assembly Diagram, sew two adjacent corner units to an ivory print C piece to make a block (Diagram 4). The block should be 9 1/2" square including seam allowances. Repeat to make 49 blocks total.
6. Sew a remaining corner unit to an ivory print D piece to make a setting triangle (Diagram 5). Repeat to make 22 setting triangles total.


Quilt. In The Loop

Assemble quilt


1. Referring to Quilt Assembly Diagram, lay out blocks, setting triangles, pinkand-orange dot sashing strips, light turquoise print sashing squares, and setting triangles in 21 diagonal rows. Sew together pieces in each row. Press seams toward sashing strips.
2. Join rows. Press seams toward sashing strips.
3. Referring to Diagram 6, trim sashing squares and ivory print D pieces 1/4" beyond points of sashing strips (see inset) to complete quilt top.
Quilt. In The Loop

Finish quilt


1. Layer quilt top, batting, and backing; baste.
2. Quilt as desired. David Hurd machinequilted a curved grid in the ivory print, feathers in the fuchsia print pieces, and a feather-and-scroll motif where the matching corner units come together with the sashing (Quilting Diagram).
3. Bind with multicolor feather print binding strips.

Patchwork Quilt "Transparency"


Patchwork Quilt
I prefer to use prints in a project to keep myself interested and so struggle to limit myself to just using solids. I used blenders for some of the lighter ‘transparent’ colours, which kept me happy!

Finished size
Approx 195cm (76 1/2in) square before binding

Materials
- 1.5m (1 3/4yd) grey solid
- 1m (1yd) each of solid red, yellow, dark blue and white
- One fat quarter each of light blue, orange, pink and green print (can be blenders or low-volume prints)
- 215cm (84in) square wadding
- 215cm (84in) square backing fabric
- 60cm (7/8yd) binding fabric

Preparation
All measurements include 1/4in seam allowances, unless otherwise stated.

CUTTING INSTRUCTIONS

1. From the grey solid, cut sixty-four 5 1/2in squares and sixteen 3 1/2in squares.

2. From the red solid cut sixteen 9 1/2 x 5 1/2in rectangles and sixteen 3 1/2in squares.

3. From the dark blue solid cut sixteen 9 1/2 x 5 1/2in rectangles and sixteen 3 1/2in squares.

4. From the white solid cut sixteen 9 1/2 x 5 1/2in rectangles and sixteen 3 1/2in squares.

5. From the yellow solid cut sixteen 9 1/2 x 5 1/2in rectangles and sixteen 3 1/2in squares.

6. From the pink print fabric, cut sixteen 3 1/2in squares.

7. From the light blue print fabric cut sixteen 3 1/2in squares.

8. From the green print fabric cut sixteen 3 1/2in squares.

9. From the orange print fabric cut sixteen 3 1/2in squares.

10. From the binding fabric cut eight strips 2 1/2in x width of fabric.

MAKING A BLOCK

1. The centre of the block is a simple nine-patch unit, made as follows (see Fig 1). Take a 3 1/2in square of pink, red and orange and sew them together into a row and press the seams to the left. Sew a second row with a 3 1/2in square of white, grey and yellow and press the seams to the right. Sew a third row of light blue, dark blue and green and press the seams to the left. Now sew the rows together, matching seams neatly. Press the seams in one direction.


Patchwork Quilt

2. Take a white 9 1/2 x 5 1/2in rectangle and sew it to the side of the block with the white square (Fig 2). Repeat on the opposite side with a yellow rectangle and press seams inwards.

3. Sew a grey 5 1/2in square to each side of a red 9 1/2 x 5 1/2in rectangle and press seams outwards.  Sew a grey 5 1/2in square to each side of a dark blue 9 1/2 x 5 1/2in rectangle and press seams outwards. Sew the red/grey unit to the side of the block with the red square, and the blue/grey unit to the remaining side of the block (Fig 3). Press seams to complete the block. Check the block is 19 1/2in square. Make another fifteen blocks in this way.

Patchwork Quilt

ASSEMBLING THE QUILT

1. Sew the blocks together in four rows, each with four blocks. Note that alternate blocks are rotated 90 degrees anti-clockwise, so look carefully at Fig 4 for the correct layout. Press the seams of rows 1 and 3 in the opposite direction to rows 2 and 4.

2. Now sew the rows together, matching seams carefully. Press the long seams all in one direction. Fig 5 shows the finished layout.

Patchwork Quilt

Patchwork Quilt


Patchwork Quilt
Handy hint
You may find straight line quilting a lot easier with a walking or dual feed foot.


QUILTING AND FINISHING

1. Create a quilt sandwich, with your backing piece right side down, the wadding on top and then the quilt on top, right side up. Use your favourite method to secure the sandwich.

2. Quilt as desired. The quilt shown has been machine quilted, with echo quilting within each colour about 1/2in from the seams. A rosette pattern was also quilted in the grey areas where four blocks meet. You could use a quilting template to create this rosette or a circular feather pattern. There are many quilting templates available in books or to buy – look in your local quilting shop, or search online for ‘quilting templates’. A template less than 10in in diameter will fit the grey area space.

3. When you have finished quilting, secure and tidy all thread ends. Square up the quilt, trimming the wadding, backing to match the quilt top.

4. For the binding, join the eight strips together with 45-degree seams, pressing seams open. Fold the binding in half lengthwise, wrong sides together, and press. Working from the right side and starting part-way down one edge, match the raw edges of the binding to the raw edges of the quilt and sew in place, folding a mitre at each corner. Before completing your stitching, neaten the short raw end of the starting piece and insert the ending piece into it. Fold the binding over to the back of the quilt and neatly slipstitch in place by hand. Add a label, including at least your name, location and the date the quilt was made.

Patchwork Quilt